Concept Pro VXM4-RT16 User Manual - page 21

18

CONFIGURING THE VXM4

CONFIGURING THE VXM4

Spot monitor and main display outputs can be configured to display particular channels when an alarm

event is triggered. Additional video popup events can be added by clicking the add icon at the bottom of

the screen.

ACTIVATION: Defines whether the video popup is enabled or disabled

LINKED EVENT: Defines which event (alarm input, motion detection, or user defined event) will activate

the video popup.

SPOT MONITER #1, #2, #3, #4: Defines which video input channel will be displayed on which spot

monitor when the event is triggered

MAIN MONITOR: Defines which video input channel will be displayed on the main monitor when the

event is triggered

DWELL TIME: Defines how long the video popup is activated for. If the UNTIL KEY option is chosen, the

video popup is activated indefinitely until a button is pressed or the mouse is clicked.

ALARM / EVENT : EVENT ACTION : VIDEO POP-UP

Determines the behaviour and actions that will trigger the internal buzzer. Additional buzzer events can

be added by clicking the add icon at the bottom of the screen.

LINKED EVENT: From the drop down box, choose which event will sound the buzzer. A linked event can

either be alarm input, motion detection, video loss or a user defined event.

ACTIVE: Defines whether the buzzer sounds for the selected event

DWELL TYPE: Can be either USE (the buzzer sounds only when the trigger criteria is present) or

LATCHED (the buzzer sounds for a set period of time after the trigger event has happened)

DWELL TIME: When DWELL TYPE is set to LATCHED, determines the time that the buzzer sounds after

it has been triggered

ALARM / EVENT : EVENT ACTION : BUZZER

DISPLAY

Allows the operator to define screen templates that can be used as part of a custom sequence set.

SINGLE SCREEN: By selecting a single screen and clicking the edit icon, the virtual keyboard can be

used to change the description of this template.

DISPLAY : SCREEN TEMPLATE