Concept Pro VXM4-RT16 User Manual - page 18

15 

CONFIGURING THE VXM4

CONFIGURING THE VXM4

Determines whether video loss will trigger an alarm condition

ACTIVATION: Video loss detection can be enabled or disabled

Determines whether motion detection will trigger an alarm condition

ACTIVATION: Motion detection can be enabled or disabled

SENSITIVITY: Between 1 (Lowest) and 10 (highest) and determines the degree of motion required before

recording is activated

To define the motion detection area, click on the motion grid icon.

Click and drag using the mouse to draw areas on the screen and then right click to bring up the motion

grid submenu.

SELECT: Selects the currently highlighted area for motion detection

DESELECT: De-selects the currently highlighted area

SELECT ALL: Selects the entire screen for motion detection

DESELECT ALL: De-selects the entire screen

CANCEL: Discards all changes and returns to the setup menu

SAVE & EXIT: Saves all changes and returns to the setup menu

Determines the behaviour of each of the 16 alarm inputs

ACTIVATION: Alarm inputs can be enabled or disabled

NORMAL STATE: Alarm inputs can be set as HIGH or LOW

DESCRIPTION: An alarm input description of up to 17 characters can be entered using the virtual

keyboard

ALARM / EVENT : SENSOR

ALARM / EVENT : VIDEO LOSS

ALARM / EVENT : MOTION DETECTION

ALARM