Concept Pro VXM4-RT16 User Manual - page 9

6

GETTING STARTED

GETTING STARTED

All features of the VXM4-RT16 can be controlled quickly and easily using just the mouse. At the

live display screen, click the right mouse button to call up the various menu options available.

Click the left mouse button to choose a particular menu option 

BASIC MOUSE OPERATION

5 different display modes are supported and can be changed by calling up the main menu and

choosing 'DISPLAY'

Under 'DISPLAY TYPE' select the required layout. For each display mode, the operator can

choose which cameras to be displayed.

For example, to display cameras 4,7,13 & 15 in quad mode, select quad mode under 'DISPLAY

TYPE'. Click the number 4 in the 'CHANNEL' box to the right and then click one of the 4 squares

below to assign camera 4 to the desired position.

Repeat the above steps to assign cameras 7,13 & 15 to the desired positions and click 'OK' to

exit back to the live view screen

To display a particular camera full screen, press the appropriate channel button on the front

panel of the VXM4-RT16

CHOOSING DISPLAY MODES

In many instances during operation, text entries are required. In this case, an on screen virtual

keyboard can be displayed by double clicking the relevant text entry box and picking the

characters or numbers required using the mouse.

The default sequence on the VXM4-RT16 is cameras 1-16 displayed in full screen, switching

every 5 seconds. To begin this sequence, call up the main menu and choose 'SEQUENCE

PLAY'. To stop the sequence, call up the main menu again and choose 'SEQUENCE STOP'.

Further complex sequences can be defined in the VXM4-RT16 display setup

RUNNING A SEQUENCE