Concept Pro VXM4-RT16 User Manual - page 29

26

CONFIGURING THE VXM4

CONFIGURING THE VXM4

INTENSIVE RECORD

The intensive record setup consists of 2 screens - parameter and schedule. The parameter setup

screen allows the operator to define frame rates and resolutions for each channel on an hour by hour

basis. The schedule setup screen allows the operator to define the recording criteria for each channel

on an hour by hour basis

The parameter screen is setup in exactly the same way as normal record parameter except, for each

channel, the operator can select which event criteria (alarm, motion, or user defined event) puts the

VXM4-RT16 in to intensive record mode by ticking the appropriate boxes.

The schedule screen is similar to the normal record setup schedule except that the only options are

RECORD ON and RECORD OFF. If RECORD OFF is selected for a particular channel / time segment,

no recording will occur, regardless of any trigger event.

Intensive recording schedules and parameters can also be saved as templates and loaded as required.

PANIC RECORD

The panic record screen allows only parameters to be changed. When the panic button is pressed, the

VXM4-RT16 will override all other recording settings and record continuously on all channels at the

settings configured here.

Once again, panic parameters can be saved as templates and loaded as required.