CONCORD FaxLync User Manual - Device Installation
FaxLync User Guide | concordfax.com | sales@concordfax.com | +1 (206)-441-3346
6
DEVICE INSTALLATION
F
axLync devices are manufactured and shipped via a Concord-approved, 3
rd
-party
supplier. Please note that devices obtained from other sources are incompatible for use
with Concord Fax Online, and are not supported.
For information re: ordering a FaxLync device, please contact sales@
concordfax.com.
Upon receipt of your FaxLync device, make sure that you have all of the
following components:
• FaxLync Device and 12V power adapter
• Ethernet cable and working internet connection
• Fax machine, of MFP (multi-function printer)
• Standard, RJ-11 phone cable/connector (the line that you would use to
connect your fax machine to a POTS line).
Your FaxLync device is shipped, pre-assigned with a fax number/account
associated with your Fax Online account.
1. Connect the phone line from your fax machine or MFP to the port
marked, “Phone 1”, on the back of your FaxLync device. There are
two (2) phone ports on the back of your FaxLync device. Your fax
service provider specifically assigns each fax number to one of these
corresponding ports (see photo, below).