CONCORD FaxLync User Manual - page 7
FaxLync User Guide | concordfax.com | sales@concordfax.com | +1 (206)-441-3346
7
2. Connect an Ethernet/network cable to the port marked, “WAN”, on the
back of your FaxLync device. Do not use the port marked, “LAN/PC” to
connect your FaxLync device to the internet.
3. Connect the power adapter to the FaxLync device (“12 VDC”), and then
to a standard electrical wall outlet (120V).
4. A series of status LED lights are located on the front of the FaxLync
device. After the device is plugged in to a power source, a green,
Power LED will light as soon as it is powered up.
5. When the initialization process completes (~60 seconds), the Status
LED will change from red to green. When the Power, Status, and WAN
lights all turn to solid green, the physical installation of the FaxLync
device is complete. Congratulations! You are now ready to send and
receive faxes from your FaxLync-enabled fax machine, or MFP.