Connect Tech Xtreme/10G User Manual - Detailed Feature Description
Xtreme/10G Managed Ethernet Switch/Router
Users Guide
www.connecttech.com
Document: CTIM-00472
Revision: 0.04
Page 11 of 24
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2017-07-27
Detailed Feature Description
Main Board-to-Board Connector
The Main Board-to-Board connector carries:
-
Input power from the carrier to the module
-
Power control and reset signals
-
24x 1G copper pairs, for termination to RJ-45s on carrier board
-
4x 10G for connection to SFP+ on the carrier board
-
8x 8G for connection to SFP on the carrier board
-
LED management signal chain
-
SFP detection and control chain
LED and SFP management signals chains required specific circuitry on the carrier; see the reference design for
details.
Function
Primary Signal and Power Breakout
Location
P1
XDG201 Module
Connector
Primary Part
Manufacturer: TE Connectivity
Part Number: 3-1827231-6
Cross Reference 1
Manufacturer: FCI
Part Number: TBD
Carrier Board
Mating Connector
Primary Part
Manufacturer: TE Connectivity
Part Number: 3-5353652-6
Cross Reference 1
Manufacturer: FCI
Part Number: TBD