1. DL manuals
  2. D-Link
  3. Wireless Access Point
  4. DAP-1320
  5. Installation And Setup Manual

D-Link DAP-1320 Installation And Setup Manual

Summary of DAP-1320

  • Page 1

    1 how do i setup and install my dap-1320? How do i setup and install my dap- ? The dap-1320 can be setup by two different methods: 1. Push button wps (wi-fi protected setup) 2. Manual note: in order to setup the dap-1320 using wps, you must have a wps compatible router/access point push button wps s...

  • Page 2

    2 how do i setup and install my dap-1320? Step 3: press and hold the wps button on the dap-1320 until it starts blinking green and then release. Once connected, the led will be solid green..

  • Page 3

    3 how do i setup and install my dap-1320? Step 4: unplug and place the dap-1320 approx half way between the router and the desired con- nection area. Note: to connect wireless to the dap-1320, use the wi-fi network name (ssid) and wi-fi pass- word information located on your configuration note.-á ma...

  • Page 4

    4 how do i setup and install my dap-1320? Step 2: from a wireless computer/device, scan for available networks and connect to the pre- defined ssid (located on the companion card supplied with the dap-1320 and on the bottom of the dap-1320) example: dlink-6dfc ..

  • Page 5

    5 how do i setup and install my dap-1320? Step 3: open a web browser and type dlinkap.Local. You will be directed to the d-link setup page. Click next to start the setup. Step 4: select the manual configuration method and click “next”. The dap-1320 will scan for available wireless networks. Select t...

  • Page 6

    6 how do i setup and install my dap-1320? Step 5: next you need to create a wireless network name and password for your extended net- work. It is suggested to configure a name that is different from your "primary" wireless network. Click next step 6: confirm your wireless settings and click save set...