D-Link DES-1228/ME User Manual - Igmp Snooping Group
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
203
IGMP Snooping Group
This window allows the Switch’s IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the
Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The number of
IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group window, click Monitoring > IGMP Snooping Group:
Figure 11- 17. IGMP Snooping Group window
The user may search the IGMP Snooping Group Table by VID by entering it in the top left hand corner and clicking Search.
The user may also delete Data Driven learning entries by entering the VLAN Name and clicking Delete, or Delete All Data
Driven learning Entries.
The following parameters can be viewed:
Parameter Description
VLAN Name/ID
The VLAN Name or ID of the multicast group.
Multicast Group
The IP address of the multicast group.
MAC Address
The MAC address of the multicast group.
Reports
The total number of reports received for this group.
Port Map
These are the ports where the IGMP packets were snooped are displayed.
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features folder and select IGMP
Snooping. Configuration and other information concerning IGMP snooping may be found in
Section 7 of this manual under IGMP Snooping.