D-Link DES-1228/ME User Manual - Snmp Engine Id
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
61
The following parameters can set:
Parameter Description
Host IP Address
Type the IP address of the remote management station that will serve as the SNMP host
for the Switch.
SNMP Version
V1 - To specifies that SNMP version 1 will be used.
V2 - To specify that SNMP version 2 will be used.
V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-
NoPriv security level.
V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv
security level.
V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security
level.
Community String/
SNMP V3 User Name
Type in the community string or SNMP V3 user name as appropriate.
To implement your new settings, click Apply. To return to the SNMP Host Table, click the
Show All SNMP Host Table Entries
link.
SNMP Engine ID
The Engine ID is a unique identifier used for SNMP V3 implementations. This is an alphanumeric string used to identify the
SNMP engine on the Switch. To display the Switch's SNMP Engine ID, click Administration > SNMP Manger > SNMP
Engine ID.
Figure 6- 40. SNMP Engine ID Configuration window
To change the Engine ID, type the new Engine ID in the space provided and click the Apply button.
Forwarding & Filtering
Unicast Forwarding
To view this window, click Administration > Forwarding & Filtering > Unicast Forwarding. This will open the following
window:
Figure 6- 41. Unicast Forwarding window