D-Link DES-1228/ME User Manual - Multicast Forwarding
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
62
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VID
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a unicast
MAC address.
Port
Allows the selection of the port number on which the MAC address entered above resides.
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding X
under the Deleteheading.
Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. To view this window, click
Administration > Forwarding & Filtering > Multicast Forwarding:
Figure 6-42. Multicast Forwarding Settings window
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding
table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below:
Figure 6-43. Setup Static Multicast Forwarding Table window
The following parameters can be set:
Parameter Description
VID
The VLAN ID of the VLAN to which the corresponding MAC address belongs.
Multicast MAC
The MAC address of the static source of multicast packets. This must be a multicast MAC