D-Link DES-1228/ME User Manual - Tftp Services
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
49
TFTP Services
Figure 6- 21. TFTP Services window
The user also has the option of transferring firmware and configuration files to and from the internal Flash drive, located on the
Switch. Using this window, the user can add a configuration or firmware file from a TFTP server to the flash memory, or transfer
that firmware or configuration file to a TFTP server. More about configuring the internal Flash drive can be found in the next
section entitled Flash File Services.
TFTP server software is a part of many network management software packages – such as NetSight, or can be obtained as a
separate program. To update the Switch's firmware or configuration file, click Administration > TFTP Services.
The following parameters can be configured:
Parameter Description
Active
Select a service for the TFTP server to perform from the drop down window:
•
Download Firmware- Enter the IP address of the TFTP server and specify the
location of the new firmware on the TFTP server. Click Start to record the IP
address of the TFTP server and to initiate the file transfer.
•
Download Configuration- Enter the IP address of the TFTP server, and the path
and filename for the Configuration file on the TFTP server. Click Start to record the
IP address of the TFTP server and to initiate the file transfer.
•
Upload Configuration - Enter the IP address of the TFTP server and the path and
filename for the switch settings on the TFTP server. Click Start to record the IP
address of the TFTP server and to initiate the file transfer.
•
Upload Log - Enter the IP address of the TFTP server and the path and filename
for the history log on the TFTP server. Click Start to record the IP address of the
TFTP server and to initiate the file transfer.
Server IP Address
Enter the IP address of the server from which to download firmware or configuration files.
File Name
Enter the path and filename of the firmware or configuration file to upload or download, located
on the TFTP server.
Image ID
To select a firmware file from the internal Flash drive to which the firmware file will be
transferred.
Click Start to initiate the file transfer.
Trivial File Transfer Protocol (TFTP)
services allow the Switch's firmware to
be upgraded by transferring a new
firmware file from a TFTP server to the
Switch. A configuration file can also be
loaded into the Switch from a TFTP
server. Switch settings can be saved to
the TFTP server, and a history log can be
uploaded from the Switch to the TFTP
server. The TFTP server must be running
TFTP server software to perform the file
transfer.