D-Link DGS-3224TGR - Switch User Manual - Serial Port Settings
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
Subnet Mask
The address mask that controls
subnetting on your TCP/IP network.
Default Gateway
The IP address of the device—usually
a router—that handles connections
to other subnets and/or other
TCP/IP networks.
VLAN Name
The VLAN name. The switch includes
a pre-configured VLAN named
“default.”
Name
A user-assigned name for the switch.
Location
A user-assigned description for the
physical location of the switch.
Contact
Name of the person to contact
should there be any problems or
questions with the system. You may
also want to include a phone number
or extension.
Serial Port Settings
Figure 6- 3. Serial Port Settings window
The following fields can be set:
Parameter
Description
Baud Rate
Determines the serial port bit rate
that will be used the next time the
switch is restarted. Available speeds
are 9600, 19,200, 38,400, and
115,200 bits per second. The default
setting is 9600.
Auto Logout
This setting for the restart of the
console is 2 mins, 5 mins, 10 mins,
35