D-Link DGS-3224TGR - Switch User Manual - Network Management
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
User Accounts – Edit
Figure 6- 10. User Accounts – Edit window
To edit a User Account, fill in the appropriate information in the Old Password, NewPassword, and
Confirm New Password fields. Then select the desired access, Admin, User, in the Access Level
drop-down menu and click Apply.
The information on the window is described as follows:
Parameter
Description
User Name
The user name being edited.
Old Password
Enter the last password used in this
field.
New Password
Enter the desired new password in
this field.
Confirm New
Password
Enter the new password a second
time.
Access Level
Displays the current access level
assigned to each corresponding user.
There are two access levels: Admin
and User. An Admin user has full
read/write access, while a User has
read-only access.
Network Management
SNMP V3
The DGS-3224TGR supports the Simple Network Management Protocol (SNMP) versions 1, 2c1 and 3.
The SNMP version used to monitor and control the switch can be specified by the administrator. The
three versions of SNMP vary in the level of security provided between the management station and the
network device.
41