D-Link DGS-3224TGR - Switch User Manual - Preface
DGS-3224TGR Gigabit Ethernet Switch User’s Guide
Preface
The DGS-3224TGR User’s Guide is divided into chapters that describe the system installation and operating
instructions with examples.
Chapter 1, “Introduction” – Describes the Switch and its features.
Chapter 2, “Unpacking and Setup” –Helps you get started with the basic
installation of the Switch.
Chapter 3, “Identifying External Components” – Describes the front panel,
rear panel, and LED indicators of the Switch.
Chapter 4, “Connecting the Switch” – Tells how you can connect the
DGS-3224TGR to your Gigabit Ethernet network.
Chapter 5, “Switch Management and Operating Concepts” – Talks about
management via the RS-232 DCE console port and other aspects about how to
manage the Switch.
Chapter 6, “Web-Based Network Management” – Tells how to manage the
Switch through an Internet browser.
Appendix A, “Technical Specifications” – Lists the technical specifications of
the DGS-3224TGR.
Appendix B, “Cable Lengths” – Contains chart for fiber-optic and copper cable
maximum distances.
Glossary – Lists definitions for terms and acronyms used in this document.
Intended Readers
The DGS-3224TGR User’s Guide contains information for setup and management and of the DGS-3224TGR
switch. This guide is intended for network managers familiar with network management concepts and
terminology.
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your
device.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells
you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.