Dp-313 wireless print server quick installation guide rev. 02 (august, 2001).
Table of contents quick installation guide 1 introduction 1 installing hardware 1 installing and starting the ps admin program 3 before install ps admin program 3 installing ps admin program 3 starting ps admin program 4 configure your print server 4 choosing a name for your print server 4 setting a...
Quick installation guide introduction the quick installatio n guide gives step-by-step instructions for setting up the wireless print server. For more detailed information about the wireless print server, its components, making network connections and technical specifications, please refer to the us...
Note 2: the print server’s ad-hoc mode supports two modes (802.11 ad-hoc mode and proprietary ad-hoc mode). You can position the dip switch on the print server to the mode you want to operate. Which option of the ad-hoc mode is required depends on the operation of your print server. It depends on wh...
8. Plug the ac power adapter into an ac power outlet. This will supply power to the wireless print server. The wireless print server self-test (post) routines will proceed automatically. Installing and starting the ps admin program ps admin program can be conveniently used to configure and manage yo...
Starting ps admin if you are using windows 95/98/me/2000 or windows nt 4.0 (or a later version of windows) to start the ps admin program: 1. Press the start button in the taskbar. 2. Within the programs menu, select ps admin. 3. Select the ps admin program. For windows nt 3.51, 1. In the program man...
To change your print server’s name, 1. Select the print server in the ps admin main window’s server name display. 2. Choose server device... From the configuration menu. Ps admin will display the server device configuration window. 3. In the server name field, enter the name you have chosen for the ...
Changing print server port settings your network print server may provides a number printer ports. For each port, you can determine: the name of the port a comment describing the port to set the parameters for a printer port, 1. Select the print server in the ps admin main window’s server name displ...
Setting up workstation printing this section describes how to make it possible for your microsoft networking client workstations to access printers connected to your print server. Microsoft networking services, based on the netbeui protocol, provide network users with peer-to-peer network services. ...
Windows 2000 client workstation printing to allow your windows 2000 workstation to print over the network directly through your network print server, 1. From the start menu, choose the setting submenu, then the printers item within it. Windows will display the printers folder. 2. Double-click on the...
6. At this point windows will ask you to choose the correct printer driver for the printer. Choose your printer’s make and model from the list, or use the driver disk included with the printer. When you have chosen the correct printer, click ok to continue. 7. If you already have a default printer, ...
