D-Link DP-313 - Air 802.11b Wireless Print Server Quick Installation Manual - Configure Your Print Server
Starting PS Admin
If you are using Windows 95/98/Me/2000 or Windows NT 4.0 (or a later version of
Windows) to start the
PS Admin
program:
1.
Press the
Start
button in the taskbar.
2.
Within the Programs menu, select PS Admin.
3.
Select the PS Admin program.
For Windows NT 3.51,
1.
In the Program Manager, double -click on the PS Admin program group icon to
open it.
2.
Double-click the
PS Admin
program icon.
The
PS Admin
program will then be ready for use.
Configure Your Print Server
Before you can print over the network using your print server, you may need to perform
some basic setup tasks. These include:
Choosing a name for your print server.
Setting a password to protect your print server’s settings from unauthorized
modifications.
Choosing names for the print server’s individual printer ports, and changing the port
settings.
Choosing a Name for Your Print Server
Each network Print Server has a server name. When the Print Server is shipped from the
factory, it has a default name of the form PS-
xxxxxx
, where
xxxxxx
represents the last six
digits of the Ethernet address found on the Print Server’s underside sticker.
It is recommended that you limit your Print Server name to
15 characters
, chosen from
the letters A to Z, the digits 0 to 9, and the hyphen (“-”) character. Names that violate
this recommendation may not be usable with some networks.