D-Link DP-313 - Air 802.11b Wireless Print Server Quick Installation Manual - page 8
Changing Print Server Port Settings
Your network Print Server may provides a number printer ports. For each port, you can
determine:
The name of the port
A comment describing the port
To set the parameters for a printer port,
1.
Select the Print Server in the
PS Admin
main window’s server name display
2.
Choose
Server Device...
from the
Configuration
menu.
PS Admin
will display the
Server Device Configuration window.
3.
Press the button corresponding to the port you wish to change.
The fields that can be changed on the Port Configuration window are:
◊
Port Name
- The name by which the port is known on various network systems.
The port name should be at most 32 characters long and may consist of letters,
numbers, and hyphens. Spaces are not allowed.
◊
Description -
A comment describing the port.
◊
Speed -
Determines whether or not the print server can send data to the printer at
high speed. Most newer printers can accept high-speed data transmission; if
your printer loses characters then you may need to choose the low-speed mode.
◊
PJL Printer -
Determines whether or not the printer accepts Hewlett Packard’s
PJL printer job control language commands. PJL allows users to get feedback
on the printer’s status. If the printer connected to the port supports PJL, set this
field to “Yes.”
4.
Press the
OK
.
5.
Press the
OK
.
6.
Choose
Save Configuration
from the
Configuration
menu. This will store the
new settings into the print server and restart it.