D-Link DP-313 - Air 802.11b Wireless Print Server Quick Installation Manual - page 10
Windows 2000 Client Workstation printing
To allow your Windows 2000 workstation to print over the network directly through your
network print server,
1.
From the
Start
menu, choose the
Setting
submenu, then the
Printers
item within it.
Windows will display the Printers folder.
2.
Double-click on the
Add Printer
icon in the Printers folder and click
Next
to proceed
further.
3.
Choose
Network Printer
selection and click the
Next
button to continue.
4.
Choose
Type The Printer Name
and enter your preferred print server name and port
name assigned during setup. For example, the printer connected to the port named
DJ-660C on server PS-142634 would be referred to by the path:
\\PS-142634\DJ-660C
5.
A prompt message will appear and click
OK
for the next step.
6.
At this point Windows will ask you to choose the correct printer driver for the printer.
Choose your printer’s manufacturer and model from the list. When you have chosen
the correct printer, click
OK
to continue.
7.
When installation is complete, press the
Finish
button to complete installation.
Windows NT 4.0 Client Workstations Printing
To allow your Windows NT 4.0 workstation to print over the network directly through
your network print server,
1.
From the
Start
menu, choose the
Settings
submenu, then the
Printers
item within
it. Windows will display the Printers folder.
2.
Double-click on the
Add Printer
icon in the Printers folder.
Windows will start the Add Printer Wizard.
3.
Choose the
Network printer serv er
selection and click the
Next >
button to
continue.
4.
Enter the network path for your network print server, specifying which port you
want to connect to. For instance, the printer connected to the port named DJ-660C
on server PS-142634 would be referred to by the path:
\\PS-142634\DJ-660C
5.
Windows will display the
Connect to Printer
window. Press
OK
to continue.