D-Link DP-802 User Manual - Enable
Internet/Print Server User’s Guide
Configuration Settings
50
an IP address automatically” option under
TCP/IP will have to be selected.
Enable
Options:
Yes/No
Default Value:
Yes
Description:
This setting is the “on/off” switch for using a
DHCP server. DHCP (Dynamic Host Configuration Protocol)
allows IP addresses to be dynamically assigned. Rather than
assigning a specific local IP address to each station, the inter-
net/print server will assign IPs to each station dynamically if
the DHCP server function is enabled.
IP Address Range -> Start
The range of IP addresses available to the internet/print server for
DHCP allocation is set using two settings. This is the first.
Options:
Any IP address within the three reserved IP
ranges. The IP chosen must correlate with the End of the
range.
Default Value:
192.168.100.101
Must Be User Modified?
No.
Description:
This setting indicates the beginning of the
range of IP addresses available for DHCP use in assigning IPs.
It is paired with the next setting to create an address range.