D-Link DP-802 User Manual - Ip Address Range -> End
Configuration Settings
51
IP Address Range -> End
This is the second of the DHCP IP address range settings.
Options:
Any IP address within the three reserved IP
ranges. The IP address used must correlate with the IP set in
the Beginning range setting.
Default Value:
192.168.100.150
Description:
This setting indicates the end of the range of
IP addresses available for DHCP use in assigning IPs. It is
paired with the previous setting to create an address range.
IP Lease Time
Options:
An amount of time, measured in minutes, from 5 to
65535.
Default Value:
1440 (24 hours)
Description:
Dynamically assigned addresses can be peri-
odically “refreshed” by a DHCP server. The IP Lease Time
setting allows you to set that time limit. If a time is entered
in this setting, each dynamically assigned address will be re-
cycled at the end of the lease time.
IP Reserve Table
Options:
Local IP Address, MAC Address (a maximum of 16
separate line entries).
Default Value:
(none)
Description:
The IP reserve table specifies ownership of par-
ticular IP addresses by particular stations or servers