D-Link DP-802 User Manual - Filter Netbios Over Tcp/ip

Configuration Settings

57

Note:

 If you are creating a second IP network, do not allow

the internet server to use DHCP if the router is also using

DHCP, unless the router is supplying IP addresses on only

one port and the internet server is not connected to that

port.

Filter NetBIOS over TCP/IP

As the name states, this feature allows you to filter Net-

BIOS traffic when it is transmitted over TCP/IP. This can

prevent NetBIOS  packets, domain name queries for exam-

ple, from initiating a dial-up connection.

Display Information

The internet/print server provides a display function which shows

the current setting and operational status of all of its functions.  In

display mode, it is only possible to view the status of settings and

functions, it is not possible to modify or control them.

Displaying Information

♦

Monitor WAN Port Link

Provides a display of the current WAN port link status (i.e.,

whether or not the WAN port is connected).

♦

Display Configuration

Displays all configuration data for the device (addresses,

ports, links, etcetera).  Configuration data is a readout of the

settings that are user-set as described in this chapter.