D-Link DP-802 User Manual - Dial Up
Configuration Settings
59
♦
Dial Up
– Dial the ISP phone access for one or the other
WAN port using the configuration stored under the WAN
port control.
♦
Hang Up
– Send the phone disconnect command string to
the modem immediately to end the current session.
♦
Reset
– Return the internet/print server’s settings to
their state prior to changes made this session and restart the
device.
♦
Factory Reset
– Return the internet/print server’s set-
tings to their original factory values and restart the device.
Note that this will wipe out all information about how the
settings are currently set.
♦
Adjust Time
– Choosing this option causes the internet
server to contact the IS Manager Server to receive an up-
dated time and date.
Save Configuration
This feature stores the current settings into the system firmware.
Activation is followed by a prompt for confirmation.
Note:
When using Telnet to modify device pa-
rameters, saving the configuration
immediately ends the Telnet session.