D-Link DP-802 User Manual - page 82
Internet/Print Server User’s Guide
Modem AT Commands
70
3
Speaker off during dialing and receiving car-
rier and turn speaker on during answering.
N
n
Automode Detection – This command interacts
with the
F
command and should be thus used.
0
Disabled
1
Enabled (Default)
O
n
Return to Data Mode – after using
+++
com-
mand to switch to command mode.
0
Return to data mode.
1
Perform equalizer retrain sequence, then re-
turn to data mode. A retrain causes the
modem to optimize for the best data transmis-
sion. This command works at speeds of 2400
bps or higher.
P
Force Pulse Dialing
Q
n
Modem Responses – Determines whether the
modem returns responses after typing a com-
mand.
0
Send responses to local computer (Default)
1
Do not send response
S
n
Select S-Register as default
S
n
?
Display the value of S-Register n
S
n=v
Change the value of Register n to v
=
v
Set default S-Register to value v
?
Display the value of the default S-Register
T
Force DTMF dialing
V
n
Response Format – Used with
Q
command.
0
Numeric response format
1
Word response format (Default)