D-Link DSL-2640B Setup Manual - page 2
2
What’s in the box:
What’s in the box:
What’s in the box:
What’s in the box:
Before you start
Before you start
Before you start
Before you start
Introduction
Introduction
Introduction
Introduction
Hello, thanks for choosing our wireless router. With
this guide we’ll take you through the setup. Don’t
let all the wires intimidate you, putting it together
is a piece of cake.
If at any time you do get stuck, there’s lots more
help on our website:
Fitting your microfilters
Fitting your microfilters
Fitting your microfilters
Fitting your microfilters
1) Plug a microfilter into your
telephone socket. If you had
to unplug something, you can
plug it back into the “Phone”
socket of the
microfilter. It’s best to leave
it out until you’ve got
everything working though.
Microfilters look small and
unimportant but they’re what
keep your phone and Internet
services from interfering with each other.
Follow these golden rules to keep your
broadband fast and reliable.
2) Plug the Power Adapter into the back of your
router and the other end of the adapter into the
nearest wall socket.
Next, screw the wireless aerial into the socket on
the back of the router.
You’ll also find:
•
The wireless aerial
•
A CD that includes the manual.
You don't need the CD and quick install guide to
get started, but the user guide on the CD will help
you use the router's advanced features.
Service
Broadband Username
Plusnet
your-username
@plusdsl.net
Madasafish
your-username
@madasafish.com
Force9
your-username
@f9.co.uk
Free-Online
your-username
@freeonline.net
•
Put a microfilter on all the telephone
extensions that have something plugged
into them.
•
Avoid using old extension cables, the less
internal wiring involved the better.
•
Don’t plug one microfilter into the socket of
another microfilter.
3) Plug one end of the grey broadband cable into
the DSL socket on the back of the router, plug the
other end into the microfilter (attached to your
phone line in step 1)
.
4) Make sure power is switched on and watch the
lights on the front of the router.
5) The Power light will first go red and the DSL
light will flash. Wait until the power light turns
green and the DSL light stops flashing before
continuing.
Item code: 048370
http://support.plus.net
Is your broadband ready?
Hold off using this guide until your broadband ser-
vice is ready to use. We send you an email when it
happens.
Got your broadband username and
password?
You’ll need them to get connected. Your broadband
username is the welcome email we sent you, it
looks like this: