D-Link DSL-300G+ User Manual - page 18
DSL-300G ADSL Modem User’s Guide
Windows 95, Windows 98 and Windows 98SE
1. First, check for the IP protocol and, if necessary, install it:
2. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
3. Double-click the Network icon.
4. The Network dialog box displays with a list of currently installed network components. If the list
includes TCP/IP, and then the protocol has already been enabled. Skip to step 2.
5. If TCP/IP does not display as an installed component, click
.
6. The Select Network Component Type dialog box displays.
7. Select
Protocol, and then click
.
8. The Select Network Protocol dialog box displays.
9. Click
on
Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list
box.
10. Click
to return to the Network dialog box, and then click
again.
11. You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions
to install the files.
12. Click
to restart the PC and complete the TCP/IP installation.
Next, configure the IP information:
1. Open the Control Panel window, and then click the Network icon.
2. Select the network component labeled TCP/IP, and then click
.
3. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
4. In the TCP/IP Properties dialog box, click the IP Address tab.
5. Click
the
Specify an IP address option.
6. Type in IP settings as follows, IP address: 10.1.1.10 and Subnet mask: 255.0.0.0
7. Click
twice to confirm and save your changes.
8. You will be prompted to restart Windows.
9. Click
.
8