D-Link DSL-300G+ User Manual - Web-Based Configuration
DSL-300G ADSL Modem User’s Guide
4
Web-based Configuration
This chapter describes how to use the embedded web-based management software to configure the Modem for
additional PVC connection profiles, to change the LAN IP address, to change the global WAN IP address and to
perform other management functions.
Manager Interface Layout
The management software used for the Modem initially presents the Quick Configuration menu pictured below
when you first log in. On the left side you see four folders, the hyperlinked Setup folder contains the Quick
Configuration menu. The LAN folder (or hyperlink) contains a single page used for assigning LAN IP settings to
the Modem so it may be used on an Ethernet LAN. The Bridging folder contains three pages, the Bridging page,
the ATM VCC page and the EoA page. These are used to configure settings that allow the Modem to operate on
the service provider’s network. If you are using the Modem for multiple virtual connections, these menus are
also used to configure these additional virtual connections (PVCs).
Figure 7. Modem Web-based Quick Configuration Manager GUI
Commonly Used Buttons
The following buttons are used throughout the web management application.
Stores in temporary system memory any changes you have made on the
current page.
Redisplays the current page with updated statistics or settings.
On pages that display accumulated statistics, this button resets the
statistics to their initial values.
Launches the online help for the current topic in a separate browser
window. Help is available from the main topic pages.
Common Buttons Used in Configuration Manager
14