D-Link DSL-502T User Manual - Installing The Usb Driver
Other manuals for DSL-502T:
User Manual, Quick Installation Manual, Quick Install Manual, Quick Installation Manual
of
91
DSL-502T DSL Router User’s Guide
Installing the USB Driver
The CD-ROM shipped with the Router contains the USB driver software.
1. Insert the DSL-502T Installation CD-ROM into the CD-ROM drive.
2. Connect the USB cable to the device. Within a few seconds you should see the “Found New Hardware”
message window, followed shortly after by the opening “Found New Hardware Wizard” window:
3. If you do not see the auto-run window pictured above, explore the CD and double-click the inf file
DLink_502t.inf.
4. Click
the
Next button.
xiii