D-Link DSL-502T User Manual - Multiple Virtual Connections

DSL-502T ADSL Router User’s Guide 

Multiple Virtual Connections 

The Router can use up to eight simultaneous PVC connections. These additional connections occupy the same 

bandwidth used for ADSL service. Additional PVC connections can be added to establish a private connection to 

remote offices or maintain a server accessible through the WAN port. Provision for additional PVC profiles must 

be done through the telephone company or telecommunications services company. The remote user must have 

suitable ADSL equipment for a successful connection. 

The New Connection menu is used to configure additional WAN connection that can operate simultaneously 

with the other connections. PPPoE type WAN connections can be disconnected or connected as needed. Non-

PPPoE type connections must be deleted from the configuration settings if you want to disable them. 

To set up additional virtual connections, follow the procedure described in Create a New Connection. Keep in 

mind that each new connection must have a VPI/VCI value set that is unique to the Router. The numbers for 

these values will be provided by your service provider. 

PPPoE and PPPoA connections may be connected and disconnected with the Connect and Disconnect menu 

buttons located in the connection settings menu. 

The remaining connection types (Bridge, Static, DHCP and CLIP) connect upon saving the settings and 

restarting the Router. These connections can be disconnected only if the connection set is deleted. To delete any 

WAN connection set, click on the Delete button in the menu for the connection. 

48