D-Link DSL-502T User Manual - Configure The Router

DSL-502T ADSL Router User’s Guide 

Use the default user name admin and password admin for first time setup. You should change the web-based 

manager access user name and password once you have verified that a connection can be established. The user 

name and password allows any PC within the same subnet as the Modem to access the web-based manger. 

Note 

Do not confuse the user name and password used to access the web-based manager 

with the ADSL account user name and password needed for PPP connections to 

access the service provider’s network. 

Configure the Router 

The first page that appears after you successfully login displays information about the Router and its connection 

status. Tabs across the top of the screen show other available menus: Setup,  Advanced,  Tools,  Status, and 

Help.   

Figure 3-2. Home – Status Information window 

When the Router is used to provide Internet access it actually must first access your service provider’s network, 

that is, it must communicate with computers and other routers owned by your service provider. These computers 

and routers then provide access to the Internet. The Router must be configured to communicate with the systems 

that give it access to the larger network. Click either the Setup tab (or the Go to setup wizard hyperlink); the 

Setup window will appear. 

16