D-Link DSL-502T User Manual - page 19

DSL-502T ADSL Router User’s Guide 

Standards Compatibility and Compliance 

The DSL-502T complies with or is compatible with the following standards as recognized by their respective 

agencies. 

•  ITU G.992.2  (G.lite “Splitterless ADSL”) compliant 

•  ITU-T Rec. I.361 compliant 

•  RFC 791 Internet Protocol compliant 

•  RFC 792 UDP compliant 

•  RFC 826 Address Resolution Protocol compliant (ARP) compliant 

•  RFC 1058 Routing Information Protocol (RIP) compliant 

•  RFC 1213 MIB II for IP compliant 

•  RFC 1334 PPP Authentication Protocol compliant  

•  RFC 1389 Routing Information Protocol 2 (RIP2) compliant 

•  RFC 1483 IP over AAL5/ Bridged Ethernet over AAL5 compliant 

•  RFC 1557 Classical IP over ATM (IPoA) compliant 

•  RFC 1661 Point to Point Protocol (PPP) compliant 

•  RFC 1877 Automatic IP assignment compliant 

•  RFC 1994 Challenge Handshake Authentication Protocol compliant 

•  Supports RFC 2131 and RFC 2132 DHCP functions including: automatic assignment of IP address, use of 

subnet mask and default gateway and provision of DNS server address for all hosts 

•  RFC 2364 PPP over ATM compliant (PPPoA) compliant 

•  RFC 2516 PPP over Ethernet compliant (PPPoE) compliant 

•  RFC 2684 Bridged/Routed Ethernet over ATM compliant 

•  IEEE 802.3 compliant 

•  IEEE 802.3u compliant 

•  IEEE 802.1d compliant 

•  IEEE 802.3x compliant 

•  Embedded web server support  

•  Supports Dynamic Learning 

•  Supports Static Routing  

•  Supports NAPT for up to 4096 connections 

•  Supports DHCP for up to 253 hot connections 

•  Supports IGMP 

•  Supports ATM Forum UNI 3.1/4.0 

•  Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions 

•  Supports TELNET and TFTP 

•  Supports back pressure for half-duplex 

3