D-MAX DCC-580D Series Manual - page 10
10
1. BRIGHTNESS
When the lens is selected MANUAL, it can be
adjusted BRIGHTNESS.
2. SHUTTER
You can select either auto or manual shutter.
Shutter speed is fixed at 1/60sec(1/50sec)
▶
A.FLK: Select this when you experience
picture flicker, which can happen when there
is a clash with the frequency of the installed lighting.
▶
MANUAL : You can control shutter speed manually(1/60~1/120,000)
▶
ESC : select this to control the shutter speed automatically.
If ESC is selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.
Notes
• When you use a DC lens, set the shutter mode to A.FLK if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization
Type, the picture may become unstable if the camera faces a bright fluorescent
light. Therefore, take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be
disabled.
3. AGC(Auto Gain Control) : the higher the gain level, the brighter the screen,
but the higher the noise
▶
OFF: Deactivates the AGC function.
▶
LOW: Allows automatic gain control from 5.3dB to 32 dB
▶
HIGH: Allows automatic gain control from 5.3dB to 37dB
4. SENS-UP
:
When it is night or dark, the camera automatically detects the light
level and maintains a clear picture if this mode is activated.
▶
OFF: Deactivates the SENS-UP function
▶
AUTO: Activates the SENS-UP function. It can be adjusted x2~x512.
Notes
• If you press the SET button in ‘AUTO’ mode, You can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it
is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
EXPOSURE
1. BRIGHTNESS 25
2. SHUTTER ESC
3. AGC HIGH
4. SENS-UP OFF
5.RETURN↙