D-MAX DCC-580D Series Manual - page 12
12
select ‘SSDR’ by using the Up and Down buttons so that the arrow indicates
‘SSDR’
- Use the Left/Right buttons to change the DWDR level in the sub menu
according to the contrast between bright and dark areas.
5. BACKLIGHT
Unlike conventional cameras, this camera is
designed so that it delivers a distinctive subject
and background at the same time, even when
the subject is in backlight, by adopting a
proprietary W-V DSP chip.
- When the SETUP menu screen is displayed,
select ‘BACKLIGHT’ by using the Up and Down
buttons so that the arrow indicates
‘BACKLIGHT’.
- Select a desired mode using the Left and Right buttons depending on the camera
purpose.
▶
BLC : Enables a user to select a desired area on a picture and view that
area more clearly.
▶
HLC (High Light Compensation) : If the scene contains extremely bright light
areas such as; from car headlight, the light can mask out much of the on-
screen detail.
• LEVEL : Adjust level of the HLC function.
• LIMIT : Enable to change the operating condition.
• MASK COLOR/TONE : Change the color / brightness of the masking area.
(Black, Red, Blue, Cyan, Magenta)
• TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
▶
OFF : Not being used
- Select a desired mode using the Left and Right buttons and press the SET button.
MAIN MENU
1. LENS DC↙
2. EXPOSURE↙
3. WHITE BAL ATW
4. SSDR OFF
5. BACKLIGHT OFF
6. DNR3 ON↙
7. DAY/NIGHT COLOR
8. SPECIAL↙
9. EXIT SAVE