D-MAX DCC-580D Series Manual - page 14
14
Note)
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the
EXPOSURE menu is ‘OFF’
• When adjusting the noise reduction level in the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced, as will the brightness
of the image.
7) DAY/NIGHT
You can display pictures in color or black and
white.
- When the SETUP menu screen is displayed,
select ‘DAY/NIGHT’ by using the Up and Down
buttons so that the arrow indicates
‘DAY/NIGHT’
.
- Select a desired mode using the Left and
Right buttons according to the picture display
you want.
• COLOR : The picture is always displayed in color.
• B/W : The picture is always displayed in black and white. You can turn on or off
the burst signal on B/W mode.
•
AUTO : The mode is switched to ’Color‘ in a
normal environment, but switches
to ’B/W‘ mode when ambient illumination is
low. To set up the switching time for AUTO
mode, press the SET button.You can turn on
or off the burst signal on B/W mode.
※ DWELL TIME : You can select the duration
time about changing the day/night mode.
→5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
Note)
• When using a Video Auto Iris Lens, if you set the lens level to low, automatic
switching between Color and Black & White may not occur
• When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as like
selecting 'COLOR' mode and 'AUTO' mode can not be selected.
MAIN MENU
1. LENS DC↙
2. EXPOSURE↙
3. WHITE BAL ATW
4. SSDR OFF
5. BACKLIGHT OFF
6. DNR3 ON↙
7. DAY/NIGHT COLOR
8. SPECIAL↙
9. EXIT SAVE