D-MAX DCC-580D Series Manual - page 17
17
Notes)
• When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor
screen even if you enter one
• Only English is available in this mode.
• If you move the cursor to CLR and press the SET button, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
SET button. Move the cursor over the letter to be edited, move the cursor to the
letter to be inserted and then press the SET button.
4)SYNC
In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359
when select 'phase'.
Notes)
• When using AC power at 60Hz frequency, you can use the L/L type
synchronization
• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
5) MOTION DET
This product has a feature that allows you
to observe movement of objects in 8
different areas on the screen,
and the words 'MOTION DETECTED'
appear on the screen when movement is
detected.
you can monitor activity more efficient.
- When the SPECIAL menu screen is
displayed, press the Up and Down buttons
so
that the arrow indicates
‘MOTION DET’.
-
Set up the mode using the 4 direction buttons.
• SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number
is high, motion detection sensitivity is increased to recognize even small
movement.
• AREA MODE : Determines whether to use the MD area selected in