D-MAX DCC-580D Series Manual - page 11
11
3) WHITE BALANCE
The screen color can be adjusted by using the
WHITE BALANCE function.
- Please indicate the arrow to point 'WHITE
BAL' on the SETUP menu by using the UP and
DOWN buttons
- Please select the mode you wish to operate
by pressing the LEFT or RIGHT button.
※ Select one of the following 5 modes, as appropriate for your purpose.
▶
ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K.
▶
OUTDOOR : Select this when the color temperature is bet
ween 1,700˚K and
11,000˚K. (sodium light inclusion) current
▶
INDOOR :
Select this when the color temperature is between 4,500˚K and
8,500˚K.
▶
MANUAL : Select this to fine-tune White Balance manually. Set White Balance
first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-
tune the White Balance and then press the SET button.
▶
AWC
→SET : To find the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the Function Setup
switch. If the environment changes, readjust it.
Note)
• White Balance may not work properly under the following conditions. In this case
select the AWC mode.
▶
When the color temperature of the environment surrounding the subject is out of
the
control range (e.g. clear sky or sunset).
▶ W
hen the ambient illumination of the subject is dim.
▶
If the camera is directed towards a fluorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may become
unstable.
4) SSDR
SSDR illuminates darker areas of an image
while retaining the same light level for brighter
areas to even out the overall brightness of
images with high contrast between bright and
dark areas.
- When the SETUP menu screen is displayed,
MAIN MENU
1. LENS DC↙
2. EXPOSURE↙
3. WHITE BAL ATW
4. SSDR OFF
5. BACKLIGHT OFF
6. DNR3 ON↙
7. DAY/NIGHT COLOR
8. SPECIAL↙
9. EXIT SAVE
MAIN MENU
1. LENS DC↙
2. EXPOSURE↙
3. WHITE BAL ATW
4. SSDR OFF
5. BACKLIGHT OFF
6. DNR3 ON↙
7. DAY/NIGHT COLOR
8. SPECIAL↙
9. EXIT SAVE