D-MAX DSC-300Se5 User Manual - page 20
18
according to low light condition with medium sensing.
●AUTO-LOW: Convert to monochrome mode automatically
according to low light condition with low sensing.
● AUTO-HI: Convert to monochrome mode automatically according
to low light condition with high sensing
● OFF: Do not convert to monochrome mode, even if the camera in
low light condition.
● ON: Convert to monochrome mode by force, regardless color,
daylight.
14. PRESET SET & RUN PAGE
It is a function to set and operate Preset, Group, Tour.
User can see the screen when moves the joystick to Right/Left after fixing the cursor on the menu.
<
① Preset set CH: User can set Preset No. and title on this menu.
-Preset No. set: Set it by moving the joystick to Right/Left
-Preset tit
le set: User can see the menu “SET ID” when presses F/F key after setting preset No.
The setting steps are the same as “ID Set” at page 14
② Preset PTZ set : Set the position of Preset.
Select the main menu with the joystick, then press F/F key for next page.
Select [SAVE] with F/N key after setting the Preset point by using the joystick and ZOOM In/Out function,
then the data is saved if user presses
<< CAMERA SETUP p2 >>
9. Zoom MAX Limit : x70
10. DSS Control : 16 fields
11. WDR On off : Off
12. WDR Level : 100
13. DAY&NIGHT of/of f:
AUTO-LOW
14. PRESET SET & RUN PAGE
15. TRACE SET PAGE
- NEXT MENU PAGE