D-MAX DSC-300Se5 User Manual - page 22
20
⑥ Run Function: Operate one of SWING/ *Set / Stop the function by a control keyboard
GROUP/TOUR/TRACE. (It is operated without the menu on the screen.
automatically after end of OSD menu)
④GROUP SET: User can set maximum 12 groups
Select a channel then move to next page after
pressing F/F key
■Set 12 Preset points in one Group, it is a function
that observes the Preset points in the Group
repeatedly and in order with regular speed, time
order with regular speed and time
• [P]: Set Preset (1~250)
• [S]: Move speed (1~64)
• [T]: Dwell time
1. Set Preset 2. Next setting 3. Set move speed
4. Next setting 5.
Delay time
6. Out of menu after saving data
⑤Tour SET Group: Maximum 12 Groups can be
chained in one Tour to operate continual Group
motions.
It is moved to the setting page if press F/F key
on this menu.
■ The Group user wants to set must be set firstly
Set the value of “00” part of T01~T12 to Group
channel that you want, then the setting is saved
when it is out of the menu after pressing F/F key
1. Select Group channel 2. Set next channel
3. Out of menu after saving data
Preset setup has to be made first to set Swing,
Group, Tour. Otherwise, it displays the
message “Sorry Undefined”.