D-MAX DSC-300Se5 User Manual - page 30
28
② Operation of Swing ③ End of Swing
(Run Pan) (Run Tilt)
3. Group setting
① Start Group setting mode
- Set Preset No. again if you want to input it continuously.
- Set a GROUP again from the first after ending with SET Key , if you want to finish Preset input in one
Group to input next Group.
② Start a Group ③ Stop the Group
.
You can stop it when pressing Group key or using a joystick
4. Tour setting
① Tour set mode
Start the Tour set mode Select a Group in 1 ~ 12
■ Repeat input in continual input
Start the Group
setting mode
Select in Preset No.1~250
and input them.
Select the Group in 1~12
Move Speed:
The Speed from A to B
64=High, 1=Low
Dwell Time:
The dwell time at the point of
A or B before the move. (sec)