Digiwave Diamond 8000P User Manual - page 8
15
14
6.1 Getting Started
3) Time Setting
This sub menu allows you to set your local time, wake up time, wake up channel and
sleep time.
- GMT Usage
: If you set ON, local time is determined by adjusting the differences from
GMT (Greenwich Meantime) according to your location.
- Current Date
: If GMT Usage ON, this date is determined by GMT. If GMT Usage OFF, you
can modify this by pressing the
button. If you set OFF, receiver doesn’t
refer to GMT. Local time is determined by adjusting current date and
current time.
- Current Time
: If GMT Usage ON, this time is determined by GMT. If GMT Usage OFF, you
can modify this by pressing the NUMERIC button.
- Local Offset
: If GMT Usage ON, Local time is GMT time + Local Offset.
- Summer Time
: you can set the summer time mode (Off/Last Sun in Oct~Mar/First Sun in
Oct~Mar/Mar~Oct)
- Wake Up Mode
: You can set the cycle of the wake up mode (Off/Once/Daily)
- Wake Up Time
: You can set wake up time by pressing the NUMERIC button on the
remote.
- Wake Up Channel
: You can set wake up channel by pressing the
button on the
remote.
- Sleep Mode
: You can set the cycle of the sleep mode (Off/Once/Daily)
- Sleep Time
: You can set sleep time by pressing the NUMERIC button on the remote
6.1 Getting Started
2) A/V Output Setting
This sub menu allows you to set audio/video output setting.
- Screen Format : TV aspect 4:3 / 16:9
- Display Format : Scaling Format Pan Scan/Letter-Box/Full Screen/Pillar-Box.
- RF Channel : Sets the channel to display the audio and video signal on your TV(3~4)
If you select 3, receiver will be displayed at channel 3 on your TV.
- SPDIF : Set this ON to enable digital audio output.