E-Collar Technologies Pro Educator Owner's Manual - page 6
TURNING YOUR E-COLLAR ON and OFF
COLLAR RECEIVER is turned ON/OFF using magnet technology
Position the red dot on the Transmitter close to the small red dot hole on the
receiver. After turning on the unit, push the vibration or tone button to assure
the collar receiver is turned on and functioning properly before putting it on your
dog.
THE ON/OFF BUTTON IS LOCATED ON THE LOWER RIGHT SIDE OF THE
TRANSMITTER:
Turning the Transmitter ON and OFF
To turn ON, press the “ON/OFF Button” for
more than 1 second.
To turn OFF, press the “ON/OFF Button” for
more than 2 seconds.
THE LCD DISPLAY NOMENCLATURE
Icon
Description
Action
M
Momentary Stimulation
Sends Single Pulse of Stimulation
M+
Momentary Boost Stimulation
Sends Single Pulse of Boosted
Stimulation
C
Continuous Stimulation
Sends Continuous Pulses of
Stimulation
C+
Continuous Boost Stimulation
Sends Continuous Pulses of
Boosted Stimulation
R
1 Second Ramp Stimulation
Ramps Stimulation from 0 to Level
Set by the Stimulation Dial
R+
2 Second Ramp Boosted Stimulation
Ramps Stimulation from 0 to
Boosted Stimulation Level
I
Instant Mode
Dial Controls Stimulation for up to
45 Seconds
V
Vibration
Vibration Sensation Similar to Cell
Phone Vibration Mode
T
Tone
Tone can be a Warning or a
Good Dog Marker
Boost Level Setting
Sets Boost Level for Each Dog
Light
Turn ON/OFF Night Tracking Light
Lost Transmitter
6 Hours Timer Setting for Beeper
Pairing/Syncing of Collar Receivers
Allows for “In the Field” Pairing of
Collar Receivers
Selection of Multi Dog Operation
Multi Dog Mode Indicator
Stimulation Level Indication
0 to 100 Levels of Stimulation
Battery Indicator
Indicates Transmitter Battery Level