Easiphone SOS Tracker with Voice Quick Start Manual - page 3
Set GEO-‐FENCE Alarm
Command: Gn, Y, Z, xxxM/KM – (send SMS with the text e.g. “G1,1,1,100M” from an authorised mobile)
Whereby:
n=Geo fence number (from 1 to 3). The user can set up to 3 Geo fences.
Y=0 means to turn off the function. Y=1 means to turn on the function.
Z=1 means to set alarm when the
device enters the prer set area.
Z=0 means to set alarm when the
device leaves the prer set area.
xxxM/KM is the radius distance from the
devices current location,
must be 3 digitals. M means meters, KM means kilometres.
The device will send, to authorized numbers, the message “Geo fence alarm!+GPS info” when it enter the set area.
NB: User must set this function when the
device already has a fixed GPS signal.
※ To turn off this function, please send “G1,0” or “G2,0” or “G3,0”.
GEO-Fence Alarm
Tel:
0808 254 0247
info@easiphone.co.uk