Easiphone SOS Tracker with Voice Quick Start Manual - page 6
Set Cell Locate
Command: CL1
– (send SMS with the text e.g. “CL1” from an authorised mobile). The
device will reply “Cell locate on!”. The device can be tracked by GSM base station tower, If GPS signal is not available.
※ To turn off this function, please send “CL0”.
Set GPS signal lost and recovery alert
Command: GR1
– (send SMS with the text e.g. “GR1” from an authorised mobile). The
device will automatically send the latest available GPS information to the authorised numbers when it enters into
the area without GPS signal.
The device will then send GPS information to authorised numbers as soon as the GPS
signal is detected.
※ To turn off this function, please send “GR0”.
Set AGPS
Command: AGPS1
– (send SMS with the text e.g. “AGPS1,50.996524,-‐1.519584” from an authorised mobile)
Al GPS is for accelerated positioning and helping position a device when GPS signals are weak or not
available. AGPS will also help to fast fix the GPS signal when you turn on the
device.
※ To turn off this function, please send “AGPS0”
Additional Location Functions
Tel:
0808 254 0247