Easiphone SOS Tracker with Voice Quick Start Manual - page 5
Set Vibration alarm
Command: V1, xxS/M/H – (send SMS with the text e.g. “V1,05M” from an authorised mobile)
Whereby xx defines the time and must be two digital, S means second, M means minute, H means hour.
If activated the
device will send an SMS alarm to all registered phone numbers every for example 5 minutes if
motion is detected.
※ To turn off this function, please send “V0”.
Set Fall detection
Command: FL1,f – (send SMS with the text e.g. “FL1,5” from an authorised mobile)
Whereby f defines the sensitivity between 1 and 9.
1 -‐ is for very fast accelerated speed.
9 -‐ is for a slow accelerated speed.
The
device will reply “fall detection on” and will send an alarm to all authorised numbers if a fall is detected.
※ To turn off this function, please send “FL0”
Vibration and Fall detection alarms
Tel:
0808 254 0247
info@easiphone.co.uk