Easiphone SOS Tracker with Voice Quick Start Manual - page 7
Set Smart Power saving mode
Command: PS1 – (send SMS with the text “PS1” from an authorised mobile)
The device has a built-in motion sensor. With this mode activated , the GSM chip is always on
but the GPS chip is only
activated by motion or an incoming call or SMS.
※ To turn off this function, please send “PS0”.
Set Deep Sleeping Mode
Command: DS1 – (send SMS with the text “DS1” from an authorised mobile)
Both the GSM and GPS chip will be off to save power, they can be only activated by motion. Once it activated they
will run for 15 minutes and sleep again if no further motion is detected.
※ To turn off this function, please send “DS0”.
Note: When the
devices battery is lower than 20%, it will send an SMS alarm “BAT: LOW! + GPS INFO” to all
authorised numbers.
Power Saving
Tel:
0808 254 0247