Easypix LCD User Manual - 10.0 Setup Mode
11
10.1 General Introduction
You can enter Setup Mode by pressing the MENU Button
and select "Setup" ( ).
10.2 Start Image (Default: LOGO)
To set up the start-up image, please follow the steps below.
1. Press the Menu Button and select "Setup".
2. Select "S. IMAGE".
3. Select LOGO and press the OK Button to confirm the setting.
Or you can select "OFF" to not have a start-up image when
power on the camera.
10.3 System Sound (Default: ON)
To set up the System Sound, please follow the steps below.
1. Press the Menu Button and select "SY.SOUND" and “ON", or
2. You can select "OFF" to turn off the System Sound.
1. S. Image (Start Image)
2. SYS. Sound (System Sound)
3. Q. View (Quick View)
4. Power Save
5. Imprint
6. Date & Time
7. Language
8.
File
9. Frequency
10. Reset All
11. Format
SETUP
S.IMAGE
LOGO
SY.SOUND
OFF
Q.VIEW 0.5 SEC
PWP SAVE 3 MIN
MOVE : CHANGE:
9.7.5 Rotate
With this setting you can rotate the image by RIGHT
o
o
o
90 , LEFT 90 , 180 , HORIZONTAL and VERTICAL.
1. Choose the image you want to rotate.
2. Press the Menu Button and choose "ROTATE".
3. Choose the rotation you prefer and press the OK
Button.
4. The image after rotation will be stored as a new
image.
ROTATE
O
RIGHT90
O
LEFT90
O
180
HORIZONTAL
MOVE : CHANGE:
10.0 SETUP Mode
9.0 Playback Mode
SETUP
BACK: SET:MENU
SETUP
BACK: SET:MENU
S.IMAGE OFF
SY.SOUND LOGO
Q.VIEW
PWP SAVE
S.IMAGE OFF
SY.SOUND ON
Q.VIEW
PWP SAVE