Easypix LCD User Manual - 6.0 Dsc Mode
7
6.2.5.3 Quality
Quality is to select the appropriate compression
ratio for the captured and recorded images.
( ) S. Fine ( ) Fine ( ) Normal
QUALITY
S.FINE
FINE
NORMAL
W.BALANCE
AUTO
DAYLIGHT
CLOUDY
FLUORESCENT
EXIT : MENU MOVE:
Operation Steps
1. MENU
2. or
3. or
4. OK
Operation Steps
1. MENU
2. or
3. or
4. OK
6.2.5.4 White Balance
In Program mode ( ), select WB of Menu Mode.
Auto Adjust the white balance automatica
lly
Daylight For strong light environment
Fluorescent For fluorescent light environment
Tungsten For tungsten light environment
Cloudy For cloudy light environment
6.0 DSC Mode
No special effect is added to the picture.
NOR
Turn the image into black and white.
Turn the image into yellowish brown.
Turn the image into negative film
effect.
NORMAL
B & W
SEPIA
NEGATIVE
METERING
MULTI
SPOT
SHOOTING
SINGLE
CONTINUOUS
AEB
SHARPNESS
SOFT
NORMAL
VIVID
6.2.5.8 Effect
In Program Mode ( ),
select Effect of Menu Mode.
Soft
This effect can make the edge of the
captured image look smoother, which is
suitable for image editing on PC.
This effect can make the edge of the
captured mage look sharp, which is
suitable for printing out.
This effect can make the edges of your
captured image look sharper but may result
in more image noise.
Normal
Vivid
6.2.5.6 Shooting
In Program Mode ( ), select Shooting of Menu
Mode.
1. SINGLE: No continuous shooting.
2. CONTINUOUS: You can have the continuous
shooting function starting by pressing and
holding the Shutter Button and ending by
releasing the Shutter Button.
3. AEB (Auto Exposure Bracketing)
Take three pictures in a series in different
exposures, short exposure (-0.5EV), standard
exposure (0.0EV) and over exposure (+0.5EV).
Note: The continuous shooting function will not
be canceled until " SINGLE" is selected.
Note: When Continuous shooting or AEB
function is selected, flash will be disabled.
Operation Steps
1. MENU
2. or
3. or
4. MENU/OK
Operation Steps
1. MENU
2. or
3. or
4. OK
Operation Steps
1. MENU
2. or
3. or
4. OK
6.2.5.5 Metering
In Program Mode ( ), select Metering of Menu
Mode.Metering provides more superior exposure
condition and brighter pictures.
Multi Metering: Exposure will be evaluated
according to the average of the available light source
in the image area. This is suitable for general use.
Spot Metering: If the subject is against the light
source or has little contrast, you can use this
function to make the subject brighter.
6.2.5.7 Sharpness
In Program Mode ( ), select Sharpness of
Menu Mode.
EXIT : MENU MOVE:
EXIT : MENU MOVE:
EXIT : MENU MOVE:
EXIT : MENU MOVE:
SIZE
12M 4032 x 3024
5M 2592 x 1944
3M 2048 x 1536
1M 1280 x 960
EXIT : MENU MOVE:
6.2.5.2 Size
Image Size is to select
the image resolution.
(12M) 4032 x 3024
(by interpolation)
(5M) 2592 x 1944
(3M) 2048 x 1536
(1M) 1280 x 960