Eberspächer EasyStart Select Operating Instructions Manual - page 10
Other manuals for EasyStart Select:
Installation Instructions Manual
of
16
10 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
3 OpeRATiOn AnD seTTing/ADjusTMenT
DispLAy FOR AiR heATeRs WiTh LiMiTeD
OpeRATing TiMe (e.g. 30 Min)
Temperature inside
the vehicle
Temperature setpoint
Remaining operat-
ing time
please nOte!
set values are copied from the previous heat-
ing mode.
heating On with shOrtpress
Activate easystart select with any button.
The start display appears.
The symbol flashes in the Menu bar.
press the
shORTpRess button for less
than 2 seconds.
heATeR On
DispLAy FOR WATeR heATeRs
Remaining operating
time
DispLAy FOR AiR heATeRs in COnTinuOus
heATing MODe (FACTORy seTTing)
Temperature inside the
vehicle
Temperature setpoint
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com