Eberspächer EasyStart Select Operating Instructions Manual - page 9
Other manuals for EasyStart Select:
Installation Instructions Manual
of
16
VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 9
heating immediately with lOngpress
press the
LOngpRess button for longer
than 2 seconds.
heATeR On
DispLAy FOR WATeR heATeRs
Remaining operating
time
DispLAy FOR AiR heATeRs in COnTinuOus
heATing MODe (FACTORy seTTing)
Temperature inside the
vehicle
Temperature setpoint
DispLAy FOR AiR heATeRs WiTh LiMiTeD
OpeRATing TiMe (e.g. 30 Min)
Temperature inside
the vehicle
Temperature setpoint
Remaining operat-
ing time
please nOte!
set values are copied from the previous heat-
ing mode.
3 OpeRATiOn AnD seTTing/ADjusTMenT
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com