Eberspächer EasyStart Select Operating Instructions Manual - page 8
8 | VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn
3 OpeRATiOn AnD seTTing/ADjusTMenT
start display
sTART DispLAy FOR WATeR heATeRs
Menu bar
status area
sTART DispLAy FOR AiR heATeRs
Menu bar
status area
Menu bAR
The following menu items are available to
choose from for air and water heaters
symbol
function
heating On / OFF
Ventilation On / OFF
The following symbols are
only displayed for
air heaters
symbol
display in the status
area
or
Temperature inside the
vehicle
or
Temperature setpoint
please nOte!
The symbol for the VenTiLATiOn menu
item is only displayed if the heater supports
this function.
sTATus AReA
if no menu item is activated, the temperature
inside the vehicle is displayed in the status
area (only with air heaters).
if a menu item (heATing, VenTiLATiOn) is
activated the following appears in the status
area:
the remaining operating time is displayed
for water heaters.
the temperature inside the vehicle and
the temperature setpoint are displayed
alternately for air heaters in continuous
operation.
if during the initial commissioning the
installation workshop changed the continu-
ous heating mode to limited time operation,
the remaining operating time is displayed
in addition to the temperature inside the
vehicle and the temperature setpoint.
Visit www.butlertechnik.com for more technical information and downloads.
www.butlertechnik.com